Model
B-SY-302S-G
B-SY-302S-G
Façade Lighting / Controllers & Control Systems
Two-channel pixel controller with GPS satellite synchronisation, so controllers on separate buildings run in step without connecting cables. It plays effects from an SD card and runs on AC 100–240V.
Features
- GPS satellite synchronisation; no cables between controllers
- Controllers set to the same mode and speed synchronise within 2 minutes
- Two data-independent RS-485 and TTL outputs
- Effects made in free software and played from an SD card
- Adjustable effect and speed
- Indoor use only
Specifications
- Input Voltage
- AC 100–240V
- Output Port
- RS-485 and TTL × 2 channels
- Pixels Driven
- SW single chip 960 points × 2 ch; single-wire 1024 points × 2 ch; standard DMX512 168 points × 2 ch; extensible DMX 336 points × 2 ch; breakpoint resume 960 points × 2 ch
- Output Power
- < 3W
- Housing
- Iron
- Working Temperature
- -15°C to 60°C
- Relative Humidity
- ≤ 50% RH
- IP Rating
- IP 0 (not dust-proof, not waterproof)
- Dimensions
- 193 × 122 × 43 mm
- Weight
- 700 g (printed "700g (N.W.5500g)")
Specifications from ACON catalogues and datasheets. Subject to change — confirm with ACON before specifying.
